Cordless gel curing for flexible workspaces
JMD-606 is a rechargeable UV LED nail lamp for professional gel services, mobile appointments and temporary workstations. Its butterfly-inspired design includes a carry handle, folding stand and removable magnetic base. The decorative butterfly light has its own manual on/off control.
Fast curing with a diamond-mirror interior
The product specification lists an average gel-polish curing time of approximately 18 seconds. This is a reference figure, not a universal curing time for every gel. Follow the gel manufacturer's curing instructions and confirm the required cycle for the formulation, shade and layer thickness being used. The diamond-mirror interior is designed to distribute light around the curing area, including the sides of the fingertips.
365nm and 395nm light for compatible gels
The dual-wavelength system is intended for compatible UV/LED gel formulations. The 365nm component supports builder gels and higher-viscosity formulations; the 395nm component supports compatible base coats, colour gels and top coats. Compatibility and complete curing should be confirmed for the specific gel and application thickness. The wavelengths alone are not a guarantee that any thick layer will cure completely.
A replaceable battery for continued use
The rechargeable battery is removable. If its capacity declines with use, a compatible original replacement battery can be purchased rather than replacing the complete lamp. Contact Jimdoa to confirm the replacement part for your unit. The stated charging time is approximately 2 hours; charging conditions and battery condition affect the actual time. Confirm runtime for the selected operating mode before planning extended cordless sessions.
Automatic sensing and low-heat operation
The automatic sensor has a stated response time of 0.3 seconds or less. Position hands according to the product instructions to activate the curing cycle. Low-heat mode and an air-duct cooling structure support heat management during use. These features are not a guarantee of zero heat or protection from UV exposure.
An IMD panel suited to routine cleaning
The IMD control panel combines a clear display with touch controls. Its surface is designed to resist scratches and contact with acetone, alcohol and cleaning agents encountered during nail work. Use the approved cleaning method in the product instructions; resistance does not mean the surface is immune to every chemical concentration or prolonged exposure. The display orientation can be reversed so the count is readable from either side of the workstation.
Easy to carry, position and clean
- A built-in handle supports moving the lamp between work areas.
- The folding stand provides a supported position without holding the lamp.
- The magnetic base detaches for cleaning and reattaches without a complicated assembly process.
- The butterfly light can be switched off independently when decorative lighting is not needed.
Testing and purchasing documentation
The supplied product information reports a 72-hour continuous endurance test for battery quality. For bulk orders, confirm the applicable CE, FCC and RoHS documentation and the specific SGS test report for the selected model and configuration. Check the document scope before making market-specific claims.
Wholesale and OEM/ODM enquiries
Contact Jimdoa with your order quantity, target market and OEM/ODM requirements. Confirm the available configuration, branding scope, replacement battery supply and required documentation before approving your order. Accessories and packaging should be agreed separately; this page does not define a standard packing list.
Frequently asked questions
Does every gel cure in 18 seconds?
No. Approximately 18 seconds is the average reference figure in the supplied product specification for gel polish. It is not a universal setting for builder gel, heavily pigmented gel or every layer thickness. Follow the gel manufacturer's instructions and validate the curing cycle.
Can the battery be replaced?
Yes. The battery is removable, and a compatible original replacement can be purchased when needed. Confirm the correct battery for the unit; a fixed replacement interval or as-new battery performance is not guaranteed.
Can the lamp work without a power cord?
Yes. The rechargeable battery supports cordless use. Charging is stated as approximately 2 hours. Confirm operating time for the chosen mode and workload before arranging a full session away from a power outlet.
Can it cure builder gel and thick formulations?
The 365nm and 395nm system is intended for compatible UV/LED gels, including suitable builder-gel formulations. Follow the gel's specified application thickness and curing instructions rather than assuming a thick layer will cure completely in one short cycle.
How do sensing and the display work?
The sensor provides automatic activation when hands are positioned as directed in the product instructions, with a stated response of 0.3 seconds or less. The display orientation can be reversed, and the decorative butterfly light has manual on/off control.
How is the lamp cleaned?
Detach the magnetic base to access the cleaning area. Follow the product cleaning instructions for both the base and IMD panel, including the permitted cleaning agents and contact time.
What should a wholesale buyer confirm?
Confirm the battery version, mode-specific runtime, rated electrical specifications, compliance documents, packaging and any OEM/ODM requirements before ordering. These details should match the selected configuration.
JMD-606 product specifications
| Item | Specification |
|---|---|
| Model | JMD-606 |
| Product type | Rechargeable cordless UV LED nail lamp |
| Wavelengths | 365nm and 395nm |
| Gel-polish curing reference | Approximately 18 seconds on average, as stated in the supplied specification; gel compatibility, application thickness and the required curing cycle must be confirmed |
| Reflective interior | Diamond-mirror design |
| Battery | Removable rechargeable battery; compatible original replacement available for separate purchase |
| Charging time | Approximately 2 hours, depending on charging conditions and battery condition |
| Operating time | Confirm for the selected battery configuration and operating mode |
| Sensor response | Stated response of 0.3 seconds or less |
| Heat management | Low-heat mode and air-duct cooling structure |
| Control panel | IMD touch panel; surface designed for scratch and chemical resistance during routine cleaning |
| Display | Reversible display orientation |
| Portable structure | Carry handle, folding stand and detachable magnetic base |
| Decorative lighting | Butterfly light with manual on/off control |
| Battery quality testing | 72-hour continuous endurance test reported in the supplied product information |
| Purchasing documentation | Confirm model-specific CE, FCC and RoHS documents and the relevant SGS test report before ordering |
Product details are based on the supplied specification. Confirm the final electrical ratings, operating mode, packing list and documentation for the ordered configuration.